Zn-Mg-Al Ground Mounting Structure

Zn-Mg-Al Ground Mounting Structure


Tilt Angle:0°- 30°

Wind Load:60m/s

Snow Load:1.4KN/㎡

Material:Zn-Al-Mg steel, SUS 304


1. Stronger corrosion resistance to lower down the maintenance cost.
2. Cost effffective than hot-dip galvanized steel structures.
3. Pre-assembled before shipment for easy installation on site.
4. Better corrosion & wear resistance and self-repairing features, no need regular maintenance after installation.

As an important "skeleton" part for building and supporting PV power systems, the robustness and corrosion resistance of mounting structures are particularly important. GOOMAX Zn-Mg-Al Ground Mounting Structure is made of materials with Al, Mg, Ni, Cr and other alloy coatings integrated into the  based on Zn coating, . Compared with traditional hot-dip galvanized steel, its corrosion resistance and damage resistance are greatly improved, which helps to extend the service life of the structures. Zn-Mg-Al coated materials are widely used in cable trays, greenhouses, railway roads, automobile motors, cooling towers, industrial air-conditioning and other fields; and now it’s applied in the PV mounting structures, with very significant advantages than HDG steel..

—— Applications of Zn-Mg-Al Ground Mounting Structures ——

Due to excellent corrosion resistance and damage resistance of Zn-Mg-Al coated steel, it has a wide range of applications:
Areas with high-corrosive soils, coastal areas with high salinity
Severe industrial atmospheric environments, agriculture/greenhouses, carports, and fisheries

—— Features of Zn-Mg-Al Ground Mounting Structures ——
01 Strong damage resistance:With low friction coefficient and stable friction characteristics, Zn-Mg-Al coated material can reduce the wear of coating; During transportation or installation, it can effectively reduce the damage and consumption of the structure itself and ensure the integrity of the mounting system.
02 Super corrosion resistance:Goomax Zn-Mg-Al ground mounting systems are made of steel alloys integrated with zinc-magnesium-aluminum elements in the coating, which greatly improves the corrosion inhibition effect of the coating. Compared with traditional hot-dip galvanized steel, its corrosion resistance is increased by 5-10 times, with life span up to 30 years.
03 Strong self-repair:For either damaged coating or processing cuts, the coating material nearby will dissolve into the water film attached to the bare metal surface, and continuously migrate and infiltrate to the exposed incision positions to form a dense protective film (white rust), which gradually covers the incisions, and separate external corrosive media from exposed metal and thus to prevent further corrosion.
04 Cost-effective:Due to its high corrosion resistance, damage resistance and self-repairing property, Zn-Mg-Al mounting structures will have extended service life, no need of regular maintenance after completion of the construction, which effectively reduces the operating cost of the power station. Moreover, the pee-assembly of mounting products makes easy installation thus helps to save installation time and labor cost..

Your Name:

    If you have any suggestions or questions, please feel free to leave us a message. Goomax sales will contact you as soon as posible.


7*24 hours service